Description
The Sky Pro takes the Sky Chair to new heights with its ability to stack and no assembly required.
Since entering the market, the Sky Chair has become one of our best-selling chairs.? With its modern appearance, comfort and strength, we have seen the Sky pop up at restaurants and resorts across the country.
Customers have told us that while they love the Sky Chair, it would be great if they didn?t have to assemble it and it was stackable. So, after going back to the drawing board, we have delivered on both these suggestions. We are pleased to introduce the Sky Pro!
Features
- 5 year structural warranty
- Dimensions: 540W x 600D x 810H x 450 Seat Height
- Made in Europe
- Stocked in: Black, Anthracite & White
- Suitable for indoor and outdoor use
- SWL: 150 kg
- The Sky Pro Chair is produced with polypropylene reinforced with glass fiber obtained by means of the latest generation of air moulding technology
- Unit Weight: 5kg
- Weather resistant, UV Stabilised – Will not fade under direct sunlight. Furnlink warrant excessive fading in a given period, refer to product warranties.
- Supplied assembled
- Stackable
- Australian Registered Design 202116446
- Produced in accordance with ISO 14001:2015 Environmental Management System Certification
Please Note: Product Sizes, Weights & Colours may vary and are subject to change.
Tests Completed
1. Outdoor furniture - General safety requirements EN 581-1:2017
2. Seat and back static load test EN 1728:2012+AC:2013
3. Seat and back fatigue test EN 1728:2012+AC:2013
4. Arm downwards static load test EN1728:2012+AC:2013
5. Arm fatigue test EN 1728:2012+AC:2013
6. Leg forward static load test EN 1728:2012+AC:2013
7. Leg sideways static load test EN 1728:2012+AC:2013
8. Seat impact test EN 1728:2012+AC:2013
9. Stability - EN 1022:2005
Seat & Back Static Load Test
| Seat Load (kg) | Back Force (kg) | Number of Cycles |
| 163 |
42 |
10 x 10s |
|
163 |
42 |
1 x 30 min
|
Seat Front Edge Static Load Test
| Seat Load (kg) | Number of Cycles |
| 132 | 10 |
General Safety Requirements
- Edges of seat, back rest and arm rests rounded and chamfered
- All other parts: free from burrs, sharp edges and sharp points.
- Movable and adjustable parts designed so that injuries and inadvertent operation are avoided
- Any load bearing part of furniture not come loose unintentionally
Tubular Components Safety Requirements
- Absence of tubular components with diameter > 7 mm and < 12 mm with a depth > 10 mm.
- Tubulars in contact with the floor are closed. Holes in them are allowed as long as they are < 7 mm or > 12 mm
Shear & Squeeze Points Safety Requirements
- Absence of shear and squeeze points, created by loads applied during normal use.
- Conformity to requirements of clause 5 of standard EN 581-1
